|
Church Systems |
|
Areac Midlands Limited is a
Christian run company that specialises in the design,
manufacture and installation of quality, easy to use
sound, vision and induction loop systems in churches.
Each system is based on discussions held at the church
and a demonstration during a Sunday morning service
allowing the congregation to assess the quality of
the system. Being a Christian company we know the
needs of churches and understand the process that
has to be undertaken before any work can be carried
out.
|
|
Security
| |
With the increase
in theft from churches many of our systems use a remote
unit (similar to the units on the right) allowing
the amplifier to be located in a secure location with
the system controlled from within the church using
a small wired remote unit. The remote can be permanently
wired or connected to various sockets in the church.
|
|
System
Operation
| |
Using a wired
remote unit allows the sound and induction loop system
to be controlled from the rear of the church or from
within the chancel by the priest or person leading
the service.
|
|
| Ease
of Use
|
All
of our systems are easy to use without compromising
on the flexibility of the system. Many of our systems
have muting on/off buttons on each input, allowing
the input to be silently switched on/off without altering
the setting of the volume control. 'Muting' buttons
make the system easier to control as only the required
inputs are switched on, thus, reducing the chances
of 'acoustic feedback howl'.
|
|
Radio Microphones
| |
We have considerable experience in supplying VHF and
UHF radio microphone systems. Great care is taken
to ensure that the radio microphone system is suited
to the church and its location so that the 'local
taxi firm’ is not heard across the system during
the sermon! For security reasons, the radio microphone
receivers are usually fixed out of sight with a small
indicator located on the mixer to show when the radio
microphone transmitter has been switched on.
|
| Installation
|
We have installed equipment in
numerous grade 1 and grade 2 listed buildings. We
take great care so as not to damage the fabric of
the building when running cable and fitting the speakers
or other items of equipment. In a number of locations
the architect has had trouble finding the speakers
and cabling which was painted to match the colour
of the stonework. Whether the church is listed or
not we take just as much care and pride in our work.
|
 |
|
Instructions |
Whilst all our systems
are easy to use, with panels that relate to the church,
a comprehensive instruction manual specific to the
installation is supplied with each system.
|
|
Cost
| |
Despite being custom
built, our systems are similar in cost to 'bought
in' equipment, but with the guarantee that the system
will meet your needs and the needs of the church.
For case studies of various church installations please
click on the links below.
|
| Location |
System |
Case
Study |
| |
|
|
| |
|
|
| |
|
|
|
