| Portable
Systems |
|
|
| Portable
sound and induction loop systems housed in a small
lightweight flight case with separate or integral
speakers suitable for indoor or outdoor use. We
can also provide systems where all the equipment
is housed in a wooden cabinet. |
| Indoor
Portable Systems |
Portable
indoor sound system designed to cover meetings of
150 to 200 people, depending on the arrangement
of the seating. The system is easy to set up and
operate whilst providing the flexibility required
for different meetings and events. Each sound system
is custom built to meet the users requirements and
usually consists of a mixer amplifier housed in
lightweight flight case, two separate small cabinet
speakers mounted on light weight stands, a radio
microphone and a ‘walkman’ type CD player.
As the system is custom built the equipment can
be altered to meet the needs of the user including
fitting name plates on the equipment.
|
Our standard mixer allows control of 8 inputs (usually
4 microphone inputs, 2 radio microphone inputs and
2 line inputs) together with adjustment of the overall
tone and volume settings. Each input has a volume
control and a muting on/off button allowing the
input to be silently switched off when not required
and back on again at the same volume without touching
the volume control. This reduces the number of inputs
switched on and thereby reduces the chances of 'acoustic
feedback howl'.
|
|
| A Line Out,
recording socket is provided on the unit, independent
of the master volume control allowing adjustments
to be made to the sound level within the building
without altering the recording level. Both the mixer
and amplifiers are housed in the same lightweight
flight case with a removable lid and approximate
dimensions of 450mm wide x 380mm deep x 160mm high.
|
|
Normally a radio microphone, a hand held lead microphone
and a small C.D. player are provided with the system,
although other input sources can be provided. Two
small cabinet speakers mounted on lightweight stands
are provided with the system and are housed in a
plastic carry case. The speakers are connected to
the system using sockets on the front panel of the
mixer amplifier. |
 |
|
| Outdoor
Portable Systems |
| Portable sound
system specifically designed for outdoor use on
training grounds. The portable unit consists of
a battery unit and a four input mixer (2 radio microphone
inputs, 1 lead microphone input and a line input).
Two Sennheiser UHF radio microphones are permanently
housed within the case. The radio microphones have
an excellent range allowing the coach to wear a
headband microphone and use the system whilst on
the pitch with the players. The unit is designed
to operate for two consecutive training sessions
or about four hours. Sockets are provided on the
front panel to allow connection of a normal lead
microphone and/or a line input. |
|
| Each
unit is provided with two integral speakers, rated
at 220W peak, that are more than adequate for most
applications. The power supply for the internal
radio microphones and the mixer amplifier is from
a removable battery unit, that can be carried separately
indoors to a mains socket for charging. Circuitry
has been provided within the portable unit to ensure
the batteries are not over-discharged. |
|
| All the equipment
including a microphone, radio microphones and battery
unit, are housed in a single flight case providing
a high degree of protection. The flight case is
suitable for going through airport baggage handling
systems with many of the systems having clocked
up a considerable number of air miles! Alternatively
the system can be supplied in an ABS plastic case
which is considerably lighter as it is not designed
for air travel. |
|
| Trolley
Unit Indoor Sound System |
Portable sound
and induction loop system using a small trolley
unit to house all the equipment. The trolley unit
has a wood finish and is mounted on castors allowing
the equipment to be stored in a secure location
when not required.
Speakers can be housed in the trolley unit or permanently
fixed in the room. When speakers and an induction
loop cable are permanently fixed, wall sockets are
provided allowing easy connection of the trolley
unit at one or more locations. 450mm deep.
|
Normally the
trolley unit houses a mixer amplifier with 8 inputs
and an integral induction loop amplifier. Microphones
can be connected to sockets on the trolley unit
or sockets within the room. Radio microphone receivers
are also normally located in the trolley unit and
are permanently connected to the mixer amplifier.
Space is available to allow a cassette deck and
C.D. player to be housed in the cabinet. A lockable
front door is provided to prevent un-authorised
use with the unit having dimensions of 695mm high
x 575mm wide x 450mm deep.
|
|
| Return |
|
| Location |
System |
Case
Study |
| |
|
|
| |
|
|
| |
|
|
|
| |
